2PCS H4 Car LED Headlight Hi/Low 50W 15000LM 6000K H4/HB2/9003 Foglight For Motorcycle lights S6

•1. 1:1 halogen lamp design, intelligent decoding.NO ERROR.

•2. Cold-pressed aluminum heat dissipation and turbine high-speed fan dual cooling system,12000/MIN high speed fan.

•3. 360-degree rotating buckle design, non-destructive installation.

•4. IP68 waterproof, cold and high temperature resistant

•5. Play and Plug,Hi and Low beam

 

Product Parameters:

Luminous flux: 15000lm/set, Upgraded 18000lm/set

Working voltage: DC 9-14V

Socket model: H4/HB2/9003

Lamp beads/light source: COB Chip

Color temperature:6000K (white light)

IP68 waterproof and dustproof rating, beam angle 360 degrees

Material: Aviation 6063 aluminum profile

Working temperature: -40-80 degrees Celsius

Service life is more than 50,000 hours

Uses: headlights, fog lights

Power: 50W/set，Upgraded 60W/set

 

Package Content:

2PCS Headlight Bulbs

 

 

Notes:

1.Each model of this headlight has a low beam and a high beam. If your car only has a low beam or a high beam after installing a certain model, it is because the low beam and high beam of each car are respectively Different models of headlights are used. Please find out which models your car's low beam and high beam correspond to before purchasing.

2. Some vehicles need to install a decoder after using LED, otherwise the following situations will occur:

- One of the two light bulbs is off or blinking.

- A malfunction light appears on the instrument panel.

- After turning on the low beam, one of the bulbs switches on the high beam function uncontrollably.

 

These situations indicate that you need to modify the decoder.

3. Adding LED bulbs is a modification, not applicable to all models. Some models need to remove the front bumper to install the LED, and you may need to pay a certain installation fee. We will not bear any installation costs. Please try to light up the LED and test it before installation, and remove the front bumper after confirming that there is no abnormality, so as to avoid unnecessary costs.