Product description
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Thank you very much for using our GPS positioning products, first I wouldd like to explain to
you the use of products and steps:
Step 1: You'll need a SIM card. Our product is only available in couintries with 2G networks.
It's compatible with 3G, 4G, and 5G networks, but only on 2G netwvorks
(In the United States, Speedtalk is required to use the carrier's Kaha (Note))
Step 2: Take out the smallest part of the phone card and open the card holof the
machine. The card insertion mode is to open the back cover of thelocator and then see the
card insertion position, put the card in according to the schematic drawing on the machine,
then fasten the card and press the button on the machine long enough for the locator to
Step 3: observe the indicator light of the machine and press the button on the machine.
The blue light and the green light will come on when the machine is turnedAt the
beginning, the blue light and the green light will come on frequently. /After half a minute
the blue light will flash, wait for the blue light to flash three timesin two seconds, the
machine goes into a normal working state. If the machine indicatoor light is always on, please
get the window to re-insert the card and then observe the indicator light, please be sure to
insert the card after the card fixed to start the machine.
Step 4: scan the QR code to download the Locator app (Android users can download the
app by scanning the QR code)
Step 5: after downloading and installing the locator software, open the locator software
first. We'll see that you enter your account number and password, whichis the number of
the bar code on the machine. The password defaults to 123456, enteryour account number
and password and then click login. In the locator app, click on theword "ME" in the lower
right corner to see the word "Language" , where we can set up our own country's
Here's how to solve the problem of a locator product not working
If the machine can get around you, then insert the card again. Insert carddagain according
to insert card step. If the indicator light is not on, then the power is oyou have to charge
it first. Wait until the indicator is in the normal flashing state, re-logbile phone
applications can be used normally. If the locator is not nearby, it isnecessary to determine
whether the machine is in a non-signal state, or, the signal is very ppoor area. Wait until the
machine to the Signal Good Place Machine will automatically online, yoou do not have to