About this product
Warranty TypeNo Warranty
BrandRain or Shine
Product description
❤We provide you with high-quality products! Real-time reply to customer service message!
❤Please check the product when you receive the package. If you find any problem with the product, please contact our customer service immediately. The customer service will solve the problem for you in time!
❤Fast delivery【Arrange delivery within 24 hours ~ 48 hours after placing the order】
❤Product packaging box + bubble bag packaging
❤Place of shipment: Manila
❤About Logistics:Manila local delivery time is expected to be two days, the rest of the region 3-5 days!
Rain or Shine Elastomerc Waterproofing Paint
USE : For Interior/Exterior Concrete
TYPE : Acrylic, Water-Based
COVERAGE : 20-25 square meters per 4 liters per coat, depending on surface porosity
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
Primer: Apply one (1) coat of ROS-8000 Rain or Shine Elasto-Proofer or Rain or Shine Prepa-White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty (Recoating interval is 2-3 hours).
1st Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
2nd Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.
Rain or Shine Elastomerc Waterproofing Paint
USE : For Interior/Exterior Concrete
TYPE : Acrylic, Water-Based
COVERAGE : 20-25 square meters per 4 liters per coat, depending on surface porosity
1) Allow the new concrete to cure from (1) one week to one (1) month to reduce water content and alkali to safe levels.
2) Neutralize concrete with ACCN-7250 Alpha Chroma Concrete Neutralizer.
3) Allow the surface to dry thoroughly and sand crystalline deposits. After which, dust off the surface.
1) Remove any flaking or peeling paint.
2) Sand, clean, and dust off.
Primer: Apply one (1) coat of ROS-8000 Rain or Shine Elasto-Proofer or Rain or Shine Prepa-White.
Putty: Whether it is a spot or full putty, you can repair minor cracks with ROS-5000 Rain or Shine Power Putty (Recoating interval is 2-3 hours).
1st Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
2nd Topcoat: Apply one (1) coat of Rain or Shine Elastomeric Topcoat.
Keep the container tightly closed and upright to prevent leakage.
Store in a well-ventilated area.
Always keep in containers with the same material as the original one.
Contain and collect spillage with a non-combustible absorbent material like sand.