Pink embroidered cloth patch cartoon smiley face love heart patch

Technics:Embroidered

Material: Cloth

Size: As the pictures shown

Use Scenarios:

Iron or Sew to any Clothing,

Perfect for Jeans, Jackets, Vests, Hats, Backpack, Handbags,etc

📌📌📌 use 📌📌📌

1. Put the cloth on the stick to be pasted, stick the side with hot melt glue on the clothes (do not tear off the plastic), iron with a hot iron, stick the cloth on the front for 10-20 seconds, and stick the cloth to fix position. Before ironing, you can use card clothing to fix it in a fixed position to avoid offsetting the cloth pulp.

2. Fix the position where the fabric sticker and the clothes (or other textiles) are together, and iron them in the opposite direction for 30-60 seconds to ensure that the adhesive melts and the cloth is firmly adhered to the clothes (or other textiles).

3. Finally press from the front for 1-2 minutes, mainly iron the edges and corners of the paste to ensure that the surface is smooth and integrated with the clothing (or other textiles).

Note: When using sequins, beads, rhinestones, silk, wool cloth to paste balls, and wire embroidered cloth pastes, you should strike the iron first, and then firmly fix the cloth to be fixed from the front corner to trim off, so as not to damage the front of the sequins or other accessories . Clothes (or other textiles) should be kept dry. Do not iron or spray fabric labels when ironing clothes.

The ironed cloth is affixed and can be closely combined with long clothes (or other textiles). After a period of time, the cloth will fall off or be washed off, indicating that the ironing temperature is low during ironing, the ironing time is too short, or the ironing.

Instruction

Step 1. Turn off the steam of your iron and set the iron on cotton setting.

Step 2. Use a hard surface to proceed like a table and put a pillow case on it to protect.

Step 3. Spray water on the back of embroidery.

Step 4. Place embroidery on clothing.

Step 5. Set iron temperature for cotton.

Step 6. Cover embroidery with a piece of damp cloth.

Step 7. Iron over the patch and piece of cloth for 15-30 seconds.

Step 8. Turn clothing inside out and ironing until dry. (Approx 20 seconds)

Step 9. Waiting until it is cool down then check for every patch's corner and around patch's edge that already seal

If not yet complete, so repeat in step 6, 7, and step 8.

This item can be either sewn on or ironed on.

However we suggest ironing into place and then sewing to ensure it is secure.

When washing your garment, turn it inside out if possible and wash on a gentle setting.

Note:

*Actually manually measured size may have some errors, it is in the range of ± 0.5cm, actual size please prevail in kind.

*Due to different lighting and shooting conditions, the picture color may has a little differences with actual product, please all to prevail in kind.