Electronic Scale with Bowl Kitchen Household Small Gram Scale

 

Power On/Off: Put The Electronic Scale On A Level Place, Press The "On Button" To Turn On, And "8888" Is Displayed At This TimeDetect The Zero Point And Display Zero Weight After It Stabilizes, Then The Weight Can Be Weighed.

If You Press And Hold The "Power Button" ButtonPower Off In 2 Seconds.

If There Is No Weighing And No Button Operation, The Electronic Scale Will Automatically Shut Down After 120 Seconds;Unit Conversion: In Normal Weighing, Press The "Unt" Key To Perform "Gram (G) → Ounce (Oz) → Pound (Ib)"The Weight Conversion Between 1000 Grams = 35 Ounces = 2.2 Pounds;Tare: When Weighing Bulk Items In A Container, Place The Container On The Scale First, And Press The Power Button Shortly.

After The Weight Window Shows Zero, Load The Item And Weigh It, Then The Net Weight Value Of The Item Can Be Obtained;Calibration: When You Feel That The Product Is Not Weighing Accurately, You Can Recalibrate It Yourself.

We Must First Prepare The Quantitative Range To Be CalibratedWeight, Turn Off The Electronic Scale, Then Press The "On Button" And Press The "Unt" Button At The Moment Of Power On, Release And EnterIn The Calibration State, Press The "Unit" Key Again To Follow The Steps Of "7000g" → "5000g" → "3000g" → "3000.0g" → "1000.0g"Select The Quantification Range To Be Calibrated In The Order Of, And Then Press The Power Button To Confirm, Enter The Internal Code Display. At This Time, The Weighing Pan Should Be Kept Empty.

After The Internal Code Is Stable, Press The "Power Button" Key. For Example, If It Displays "Calo" → "Calibration Range" → "Internal Code", It Means That The Zero Point Calibration Is Completed, And Then Put The Calibration Weight On The Scale. On The Disk, After The Internal Code Value Is Stable, If It Displays "Cal1"→"Pass" And Automatically Changes To The Weighing Interface, It Indicates That The Calibration Is Successful.Precautions:

Precaution

If the weighing is greater than 105% of the marked range, “0-Ld” will be displayed to indicate overload. At this time, remove the item and weigh after the weight is reduced. Continuous overload will cause irreversible damage to the product;

When the power is turned on, "LO" is displayed, indicating that the battery power is insufficient, and the battery should be replaced in time;