FGH 8A BMS for Lifepo4 Battery - 8S 24V (15A, 20A, 30A, 40A, 50A, 60A, 80A, 100A)

Variation

8S 24V Discharge 15A Charge 8A lifepo4 bms, same port

8S 24V Discharge 20A Charge 10A lifepo4 bms, same port

8S 24V Discharge 30A Charge 15A lifepo4 bms, same port

8S 24V Discharge 40A Charge 20A lifepo4 bms, same port

8S 24V Discharge 50A Charge 25A lifepo4 bms, same port

8S 24V Discharge 60A Charge 30A lifepo4 bms, same port

8S 24V Discharge 80A Charge 40A lifepo4 bms, same port

8S 24V Discharge 100A Charge 50A lifepo4 bms, same port

included in the box

BMS x 1

balance wire x 1

Description

- Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.

- Strong load ability, constant discharge current 15A 20A 30A 40A 50A, use high voltage resistance

- inner resistance power Mosfet. The heat sink will greatly help cooling.

- IC itself has power balancing function. The circuit is simple and reliable.

- Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won't affect the PCB and the battery

- Extreme low power consumption. The consumption of the whole device is less than 50uA.