Elegoo Rapid PLA+ Filament 1kg 1.75mm - High Speed 3D Printing Filament

Compared with PLA, it is suitable for both high-speed and low-speed printing, and less prone to stringing during high-speed printing, with better overhang and bridge printing results. When the same force is applied, the deformation is less than that of PLA.

 

Nozzle Temp: 200-230C (recommended 220C)

Bed Temp: 40-60C

Printing speed: 30-600mm/s

Density: 1.2g/cm3

Melt Index: 8.2g/10min (190C/2.16kg)

Tensile Strength: >= 60MPa

Elongation at Break: 19%

Bending Strength: 80MPa

Bending Modulus: 2680MPa

Charpy Impact Strength: 3.85kJ/m2

Fan: 100%

Line length: 330-335m

Rockwell hardness: 88