MIHOMEMI Water Dispenser Hot & Cold Bottom Load Freestanding Automatic Water Pump

✅Authorized seller, 3 year LOCAL WARRANTY,This is the exclusive service of our store! Other sellers can't provide it!

✅Most of the products in the store are in stock, Generally Shipped within 24 hours, from Manila

✅Our products have been strict quality control, you can buy it with confidence.

✅Your message, we will reply as soon as possible. If you have any questions, contact us.

✅You can pay attention to us and get exclusive fans exclusive offer.If you are a wholesaler, please feel free to contact us for wholesale price.

- - -

🛎 Features:

Model: Floor standing

Suitable for all types of water tanks, no need to worry about 4L~20L or more

Suitable for offices, schools, hotels, restaurants, etc.

There is a hot and cold water switch on the back.

The minimum temperature is 10-20 degrees, and the heat is about 90 degrees or higher.

Rated power: 550W

Rated power: 75W (cold water), 450W (hot water)

Voltage: 220V-50Hz

Wire length: 1.25m

Size:

Upgraded - Black 🔥: 93 * 34 * 31cm

Floor - White: 29 * 32 * 84cm

- - -

Notes:

Please turn on the switch at the rear of the machine after adding water and before powering on. Turn on the cooling and heating switches at the rear of the machine. Cooling and heating will begin to work. When the cooling and heating lights are off, it indicates that the cooling and heating process has been completed, and you can add water.

Please note that different ambient temperatures can affect the cooling time. In environments with temperatures exceeding 30 ° C, more time may be required. Cool for 1 hour. Heat simultaneously for about 16 minutes. The water storage capacity is 400ml, and it will be cooled again after connection. Therefore, please wait anxiously while waiting for further cooling.

Water dispenser precautions🚨

WARNING: Do not plug in without a bucket in place! Otherwise, the water pump will be damaged by dry burning!

Instructions:

After receiving the product, please do not plug in the power supply to test!

Place the bucket (gallon) on the bottom and close the door. Before plugging in the power supply, make sure there is water in the barrel and the hot and cold switch is off, otherwise it will cause dry burning damage!

After plugging in the power supply, wait for the water pump to draw water for 5 minutes before turning on the cold and hot switches on the back!