10/20/30 PWM 12V/24V USB Solar Panel Regulator Charge Controller battery charger LCD Display

The controller adapts automatically to 12V/24V. When installing for the first time, please make sure that the battery has enough voltage so that the controller can recognize the correct battery type.

Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect the normal voltage judgment.

This controller is only suitable for various lead-acid batteries (including openings, seals, gels, etc.), please do not use other batteries (including lithium batteries, nickel-metal hydride batteries, etc.)

The controller can only use photovoltaic panels as the charging source, please do not use DC or other power sources as the charging source.

The controller will heat up when it is running. Please install the controller on a flat, well-ventilated surface.

 

 

Adopt industrial-grade main control chip

Large-screen LCD display, adjustable charging and discharging parameters

Complete 3-stage PWM charge management

Built-in overcurrent/short circuit protection, open circuit protection, reverse connection protection, all are self-recovery type, do not damage the controller

Dual MOS anti-backflow circuit, ultra-low heat generation

 

 

1* Solar Controller

 

 

Note：This controller is only suitable for various lead-acid batteries (including openings, seals, gels, etc.), please do not use it to charge other batteries (including lithium batteries, nickel-metal hydride batteries, etc.)

 

SYSTEM CONNECTION：

1.Connect the battery to the charge regulator-plus and minus.

2.Connect the photovoltaic module to the regulator-plus and minus.

3.Connect the consumer to the charge regulator-plus and minus.

The reverse order applies when deinstalling!

An improper sequence order can damage the controller!

 

Descriptions:

The LCD display keeps you informed of status and data. You can also easily switch modes and parameter configurations, and you can use the controller in different places such as home, industry, and business. Built-in over current protection, short circuit protection, reverse polarity protection, open circuit protection, automatic recovery, and no damage to the controller, providing reliable protection for your equipment.

 

*The reverse order applies when deinstalling!

*An improper sequence order can damage the controller!

*All red color voltage X2 ,while using 24V system.

*This solar controller is not waterproof ,please install it indoor or out of the rain

 

 

There are optional 10A 20A 30A model:

 

10A:

if your battery is 12V ,the max solar panel input is 25V 120W

if your battery is 24V ,the max solar panel input is 50V 240W

 

20A:

If your battery is 12V, the max solar panel input is 25V 240W

if your battery is 24V, the max solar panel input is 50V 480W

 

30A:

if your battery is 12V ,the max solar panel input is 25V 360W