About this product
- Warranty Type:Supplier Warranty
Product description
Memory speed: 2133Mhz /2400Mhz/2666Mhz/3200Mhz
Color: Black or Green (Random)
This document describes ValueRAM's KVR24N17S6/4 is a 512M
x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM),
1Rx16, memory module, based on four 512M x 16-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
This document describes ValueRAM's KVR26N19D8/16 is a 2G x
64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2666 timing of
19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
• Power Supply: VDD = 1.2V Typical
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
#DDR4 #RAM #2133 #2400 #2666 #3200 #pc #desktop