•Place a sheet of paper underneath the ink tank area, in case of spillage. Then turn on your printer. Make sure thepowerlight is on, but not flashing.
•Unhook the ink tank unit from the product and lay it down, do not pull on the ink tubes.
•Open the ink tank unit cover, and then remove the ink tank’s cap. Make sure the color of the ink tank matches the ink color you want to refill, and only remove the cap from that ink tank. Be careful not to spill any ink.
•Snap off the tip of the bottle cap, but do not dispose of the bottle cap tip so you can use it to seal the bottle cap later, if necessary. Then remove the cap, remove the seal from the bottle, and replace the cap on the bottle. Make sure the color of the ink bottle matches the ink color you want to refill.
•Install the bottle cap tightly; otherwise, ink may leak.
•Refill the ink tank with the correct color ink up to the upper line on the ink tank.
•If any ink remains in the ink bottle after filling the ink tank, place the bottle cap tip securely on the bottle cap and store the ink bottle upright for later use.
•Place the rubber cap securely on the ink tank.
•Repeat the previous steps as necessary for each ink color you need to refill.
•Close the ink tank unit cover.
•Hook the ink tank unit onto the product. If thepowerlight is on, press thestopbutton.