USB to TTL supports 3.3V 5V FT232RL module dedicated download cable mini interface TYPE-C

Chip/Driver: FT232RL

Draw out all signal port of FT232RL chip.

RXD/TXD transceiver communication indicator.

USB power supply, can choose 5V or 3.3V ,set by jumper.

With over current protection, using 500MA self-restore fuse.

Pin definition: DTR,RXD,TX,VCC,CTS,GND

Pitch:2.54mm

Module size:36mm(length)*18mm(width)

Interface: Mini-USB

มีจุดต่อทั้งหมด 6 พิน :

DTR: Data Terminal Ready - an output used for flow control

RX: Serial data Receive pin

TX: Serial data Transmit pin

VCC: Positive voltage output - this is controlled by the jumper. If the jumper is set to 5V, this will provide a 5V output. If the jumper is set to 3.3V, this will provide a 3.3V output.

CTS: Clear To Send - an input used for flow control