50pcs/set Tile Level Level Wedge Tile Spacer System Level Locator Shim Clamp Tile Locator Level

Material: high quality PP+stainless steel

Scope of application: Masonry Applicable brick joints: 2-6mm/0.08-0.24"

Applicable tile thickness: 3-16mm/0.12-0.63"

Size: 86*30*20mm/3.39*1.18*0.79"

 

Recommendations:

Lay the first tile, leaving 2 mm more (with cross spacers).

Close to the tiles.

Insert T-pins along the tile gap.

Rotate 180 degrees and the T-pin snaps into the bottom of the tile Two tiles.

Adjust the cover with a hand/special wrench until the two tiles are on the same level.

After leveling for about 5-6 hours, before the cement/adhesive is completely dry, turn the cover upside down and remove the 180-degree T-pin until the letter is removed

 

Avoid disassembly of the T-leveling system:

1. The tile spacing is greater than 2mm (recommended cross spacing)

2. When leveling, the cement or tile glue around the T-shaped leveler