POOL MURIATIC ACID MULTI-PURPOSE (3.7L)

 

 

Toni Muriatic Acid balances your pool chemistry by lowering total alkalinity and pH of your pool water. It typically has a lower concentration of hydrogen chloride than the muriatic acid you’ll find at hardware stores for use in industrial applications like masonry.

 

 

How to use:

 

If you have a pH reading of 7.8 or higher, and an average size (15,000 gallons) in-ground pool, you should add 1/4 gallon (a quart) of muriatic acid, and re-test after the water has circulated for an hour. If you have a smaller pool, or an above-ground pool, you would start with one cup of acid, and then re-test and add more if needed. If you have a spa, we are talking only capfuls at a time. Very little acid is needed to adjust pH in a spa.

 

 

How to use TONI Pool Muriatic Acid

 

When you add acid, pour it into the deepest part of the pool, while the pump is running and circulating the water. Wait at least an hour before using the pool; if you added a lot of acid, wait 24 hours and test the pH before using the pool.