Men's Manual Shaver With 6-layer Stainless Steel Hair Removal Blade And Replaceable Shaver Head I5N7

Product Name: Men's Manual Shaver

Product Color: As shown in the picture

How to use:

1. Clean your face: Before shaving, wash your face with warm water or apply a hot towel to your face for a few minutes to soften the beard and open the pores. This helps reduce discomfort and skin irritation during shaving.

2. Apply shaving cream:

Apply an appropriate amount of shaving cream or gel to evenly cover the area to be shaved. Shaving cream can help lubricate the skin, reduce friction, and make the shaving process smoother.

Shaving steps

1. Hold the razor:

Grip the handle of the razor to ensure a firm and comfortable grip. The handle design is usually ergonomic for better control of the razor.

2. Shave in the direction of hair :

Gently slide the razor from top to bottom and shave in the direction of hair . This can reduce the risk of skin irritation and cuts.

• For different areas of the face, such as the cheeks, chin, and neck, the shaving angle can be adjusted appropriately according to the direction of hair .

3. Gentle operation:

• Keep the razor at an angle of about 30 degrees to the skin top, and do not apply too much pressure. Let the razor slide naturally across the skin top and avoid pressing hard.

• Especially for sensitive areas, such as the neck and under the chin, the action should be more gentle.

4. Check multiple times:

• During the shaving process, check the shaving effect from time to time to ensure that there is no missed area.

• If there is an unshaved part, you can repeat the above steps to trim it.

5. Wash the face:

• After shaving, rinse the face with clean water to remove the remaining shaving cream and broken beard.

• Rinse the face with cold water to help shrink pores, reduce redness and irritation.

vane replacement

1. Check the vane:

• Regularly check whether the vane is blunt or damaged. If you find that the vane is no longer sharp or rusty, you should replace it with a new vane in time.

2. Remove the oldvane head:

• Depending on the specific model of the shaver, find the locking mechanism of the vane head. Usually it can be unlocked by pressing a button or rotating the vane head.

• Gently pull out the old vane head, being careful not to scratch your fingers.

3. Install the new vane head:

• Take out the new vane head and align it with the handle part of the shaver.

• Insert the new vane head into place and hear a "click" sound to indicate that it has been properly installed. Make sure the vane head is firm and not loose. Cleaning and maintenance

1. Clean the shaver:

• Rinse the shaver thoroughly with water to remove residual shaving cream and hair.

• Some shavers are equipped with a cleaning brush, which can be used to remove fine hair and dirt on the vane head.

2.

Dry storage:

• After cleaning, place the shaver in a ventilated place to dry, or wipe it dry with a clean cloth.

• It is best to store it in a dry and ventilated place to avoid rusting of the vane head due to a humid environment.

Notes:

1. The manual measurement tolerance is 2-5. Please do not mind your replacement.

2. Due to the difference between different monitors, the image may not reflect the actual color of the item. Thank you very much!

3. The effect varies from person to person, and regular use is recommended