About this product
Warranty Duration12 Months
Warranty TypeSupplier Warranty
BrandPCWORX
Product description
This document describes ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
● JEDEC standard 1.35V and 1.5V Power Supply
● 800MHz fCK for 1600Mb/sec/pin
● 8 independent internal bank
● Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
● Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
● Burst Length: 8 (Interleave without any limit, sequential with starting
address “000” only), 4 with tCCD = 4 which does not allow seamless
read or write [either on the fly using A12 or MRS]
● Bi-directional Differential Data Strobe
● Internal(self) calibration : Internal self calibration through ZQ pin
● On Die Termination using ODT pin
● Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at
● PCB: Height1.18” (30mm), double sided component
● Lead Free RoHS Compliant
Row Cycle Time (tRCmin) : 48.125ns (min.)
Refresh to Active/Refresh: 260ns (min.)
Row Active Time (tRASmin): 35ns (min.)
Operating Temperature: 0oC to 85oC
Storage Temperature: -55o C to +100oC