About this product
Warranty TypeManufacturer Warrenty
Product description
This instrument is portable mutitester designated for measurement of weak current circuits.
Overload protection circuit up to maximum 230V is provided.
DCV: 0.25 / 2.5 / 10 / 50 / 250 / 1000V
ACV: 10 / 50 / 250 / 100V
DCA: 0 - 0.5 - 50 - 500mA
Ohm Meter: X1 / x10 / x100 / x1K(2k /20k2M)
Decibels: -10dB to + 22dB (for 10VAC)
Intermal battery: 9V x 1 + 1.5V x 2(No Include)
Plug the test leads into COM and + sockets.
Place the range selector to a prescribed range position.
Short the test leads and turn 0A DJ to set the poin-ter to zero position.
Make sure that there is no voltagea crossthe circuit to be tested.
Connect the test leads to the tested resistor and read the scale in accordance with the reference table.
CONTINUITY TEST (BUZZ) Set the range selector knob to BUZZ,apply the test lead pins to two points to be tested and test continuity.Then the buzzer will buzz at between 0 and about 120 .It is impossible to test a point where voltage is being applied.
CONTINUITY TEST (LED). Set the range selectot to the"CONT'Y" position.Connect thetest leads to the tested circuit if the"LED" in the tester produce light ,that mean the tested circuit is continuous.
SURFACE MOUNT TECHNOLOGY.
POLARITY SWITCH FUNCTION.
10A DC CURRENT MEASUREMENTS.
FUSE AND DIODE PROTECTION
Analog Multimeter with Mirror Scale Inbuilt Buzzer and LED 0 Ω Adjustment with X 100 Range Transistors Test , hFE with Diode.
Test Resistance Range : X1 , X10 , X100 , X1K , X10K
Special Functions : Diode Test Transistor
Testing Continuity Buzzer About 100 Ω Function Protection Iceo : 150µA - 15mA - 150mA
BType of ProductAnalog MultimeterAC Voltage (Volts)10-1000 VAC Voltage Accuracy±4%DC Voltage (Volts)0.1mV-1000 VDC Voltage Accuracy±3%DC Current (Amp)50µA-10 ADC Current Accuracy±3%Resistance (Ohm)0.2 Ω-20 MΩResistance Accuracy±3%hFE ( TR Amplification factor)0-1000Size (mm)148x100x35 mmIncludesTest Leads,