BLUETTI AC70P Portable Power Station | 1000W 864Wh

AC70P gives you the freedom to recharge your devices in any way you prefer: wall charging, solar charging, car charging, generator charging, or LiFePO₄ battery charging. Whether you are at home, on the road, or outdoors, you can always find a suitable power source for AC70P.

High-Efficient PV Charging

Ensure endless power supply while exploring the great outdoors.

BATTERY INFO

Capacity: 864Wh

Type: LiFePO4 (Lithium Iron Phosphate)

Life Cycles: 3,000+ Cycles to 80% Original Capacity

Shelf-life: Recharge to 80% Every 3-6 Months

Management System: MPPT Controller, BMS, etc.

OUTPUT

AC Outlets:

2 ×120V/8.3A

1,000W In Total

Inverter Type: Pure Sine Wave

Surge Power: 2,000W

USB-C: 2 ×100W Max.

USB-A: 2 ×USB-A: 5VDC/2.4A (Each Port)

12V DC Outlets: 1 ×12V/10A (Car outlet, regulated.)

Wireless Charging Pad: 1 ×15W Max.

INPUT

AC Power Input (Turbo Mode): 950W Max.

Solar Input: 500W Max., VOC 12-58VDC, 10A

Car Input: 12/24V from Cigarette Lighter Port

Max Input: 950W

RECHARGE TIMES

AC Charging Cable (950W Turbo Charging): ≈1.5-2 Hours

Solar Panel (s)(500W): ≈2.2-2.7 Hours (With prime sunshine, ideal orientation and low temperature)

12V/24V Car Outlets (100W/200W): ≈≈9.1-9.6 Hours / 4.8-5.3 Hours

GENERAL

Pass-through Charging: Yes

Weight: About 22.5lbs / 10.2kg

Dimensions (L x W x D): 314 × 209.5 × 255.8mm / 12.4 × 8.2 × 10.1in

Charging Temperature: 0°C-40°C / 32°F-104°F

Discharging Temperature: -20°C-40°C / -4°F-104°F

Storage Temperature: -20°C-40°C / -4°F-104°F

Warranty: 5 Years

Q1: What battery chemistry is used with AC70P?

Answer: AC70P uses Lithium-ion Phosphate batteries (LiFePO₄) for safety and durability, ensuring over 3,000 charge cycles while retaining 80% capacity.

Q2: What is Power Lifting Mode？

Answer: Power Lifting Mode allows AC70P to run high-power heating devices up to 2,000W, such as space heaters, hair dryers, electric kettles, electric blankets, etc. Do NOT use these units to run an air conditioner or washing machine as the built-in motors / compressors may have a surge power of 2-4 times the rated power, which may exceed the output of AC70P.

Q3: Can I charge and discharge AC70P at the same time?

Yes.

Q4: How do I know if AC70P can power my loads?

Calculate the total wattage of your devices and ensure it doesn't exceed the rated power of AC70P, which is 1,000W. The Power Lifting Mode only works for resistive loads of up to 2,000W.

Q5: How quickly can I charge the AC70P?

AC70P supports up to 950W AC input. Plug it into a wall outlet and enable the Turbo Charging mode on the BLUETTI App, and you can fill it up in only 1.5 hours.

Q6: What's the difference between Silent, Standard, and Turbo Charging modes?

These are the 3 AC charging modes, each with a different input power and charging speed. It generates only 45dB of sound in the silent charging mode, while Turbo Charging mode provides a higher charging speed.

Q7: Does AC70P support BLUETTI App control?

Yes, via Bluetooth.

Q8: What solar panel should I choose?

Please refer to the following requirements: · Total open circuit voltage for AC70P: 12V-58V · Equipped with MC4 connectors. Highly Recommended: AC70P: 1 x BLUETTI PV350 or 2 x BLUETTI PV200 * For reference ONLY.

Q9: Is the AC70P waterproof?

No.

Q10: Can I lay it on its side to save space?

No, this may damage the internal structure. Please keep it upright during storage or moving.

Q11: Can I replace the built-in battery?

No. If the internal battery pack malfunctions or is dead, please contact BLUETTI Support for further assistance.

Q12. Can I expand its capacity by connecting to B230 / B300 batteries?