220V AC Gear Motor Speed Controller 6W-250W Reversing Controller Single-phase Moto Stepless Speed Regulation

1, working power: AC220V 50/60HZ, voltage fluctuation range plus or minus 10% Ue;

2, rated power: 6W 15W 25W 40W 60W 90W 120W 180W 200W 250W

3, the use of the environment: -10 ~ +50 ° C;

4. Relative humidity is less than 90%;

5, speed range: 90-1400r/min 50HZ, 90-1700r/min 60HZ

Opening size: length 80MM* width 52MM

The governor is suitable for 5 lines of gear reduction motor, main line red, green white capacitor, 2 blue speed feedback, yellow ground can be ignored. Positive and negative: behind the white cable, COM does not move, CW and CCW swap. Micro-adjustment: The side of the product is fast clockwise and slower counterclockwise. The AC220V power supply is connected to the AC position.

Instructions for use

1. The governor starts slowly when it is turned on and has a soft start function.

2. This product adopts generator feedback voltage control. The control line is: “blue” and “blue”. The yellow ground wire does not work and can be ignored.

3. If the speed governor and the motor are connected, if the torque or speed is not met, please adjust the US-52 side trimmer potentiometer.

4. To change the direction of motor operation:

a. If COM is shorted to CW, the motor will rotate forward.

b. If COM is shorted to CCW, the motor is reversed.

5. The panel switch only controls the motor to operate or stop, and does not use the power supply for interruption. If it is not used for a long time, please turn off the power.