220V W3002 Incubator Temperature Controller Led Digital Thermoregulator with Waterproof Probe Incubator Parts Accessories eggincubator

💞【Follow】Like and follow us will get extra coupons!

⭐【Authentic】All products in our shop are quality assured

👉【COD】All the listed products are supported by cash on delivery

💥【Shipping】Delivery from Metro Manila within 24 hours

⭐【Guarantee】7 Days Money Back Guarantee

❤️【Service】Please do not ask for a refund lightly, contact customer service within 24 hours

➡️Product Description:⬅️

⭐XH-W3002 Digital Temperature Controller: Input Power:AC 110-220V;Output Power: 1500W (MAX);Output Current: 10A (MAX)

⭐2 Working Modes: Digital LED Temperature Controller Module Has 2 Working Modes:Heating Mode (Start Temperature is Lower Than Stop Temperature) and Cooling Mode (Start Temperature is Higher Than Stop Temperature), Range from -50°C to 110°C; The High Temperature Control Accuracy : 0.1℃

⭐LED Indicator: the LED Indicator Light Can Display the Current Output Status; The Digital Display Tube Can Display the Measured Temperature, and the Temperature Measurement and Control Accuracy is High

⭐Waterproof Probe: XH-W3002 Digital Controller is Equipped with a 1M NTC10K Probe Which Made of Stainless Steel, Which is Waterproof and Not Easy to Rust, Very Easy to USE

⭐Durable Material: XH-W3002 Digital Thermostat Switch is Made of ABS, One of the Five Major Synthetic Resins, Which is Non-Toxic, Strong Impact Resistance, Heat and Low Temperature Resistance,Longer Service Time

⭐Application: XH-W3002 Temperature Controller Module Widely Be Applied for the Conditioning Systems,Incubators,Equipment Cases, Temperature Control Protection and so on

➡️How to Ues⬅️

⭐P0 set startup temperature Press the setting button once to enter the internal menu, the default display is P0, press the setting button again, and set the required startup temperature by pressing the up and down buttons.

⭐P1 set stop temperature Press the setting button once to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the setting button again, and set the desired stop temperature by pressing the up and down buttons.

⭐P2 Set temperature correction Enter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.

⭐P3 set delay start Enter the internal menu in the same way, switch to P3 by pressing the up and down keys, press the setting key again, and set the required delay time (unit is minutes) by pressing the up and down keys. Delay start is generally used for compressor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compressor back pressure, the general setting value is 3-6 minutes. If you are not used to control the compressor or do not need delay time function, skip this item directly.