450ML Chrome Spray Paint Metal Silver White Black Rust Remover Stainless Steel Aluminum Alloy Spray Refurbishment for car and motorcycle

Simple to operate, safe and environmentally friendly.

It features ultra powerful nozzle and humanized snap switch.

Non-Toxic, Non-Conductive & No Chemicals. It is safe to use.

The Coat can cling onto item surface for months and protects the surface from oxidation. Instantly restore shine and prevent the rust from growing back again. It is not allowed to apply varnish and paint on it.

It is perfect for use on stainless steel, aluminum alloys, and other metal surfaces, providing a vibrant and lasting finish while removing rust and preventing future corrosion.

 

Product Info:

Product Name：Chrome spray

Size: 350 ml (silver) 450ml (black and white)

 

Scope Of Application:

A cutting-edge solution designed for a wide range of applications, including metal restoration, corrosion protection, and decorative finishes.

This spray paint is suitable for various metal surfaces, including:

 

- Stainless steel

- Aluminum and aluminum alloys

- Iron and steel

- Brass and copper

- Metal fixtures and hardware

- Automotive and motorcycle parts

- Metal furniture and outdoor equipment

- Metal sculptures and artwork

 

How to use

Please read the instruction manual carefully !

1. Ensure that the surface to be painted is clean, dry, and free from dust, dirt, grease, and oil. If necessary, use a mild detergent or degreaser to clean the surface, then rinse thoroughly and allow it to dry completely.

2. Lightly sand the surface with fine-grit sandpaper (220-320 grit) to remove any existing rust, loose paint or coatings, and to create a smooth and even surface for optimal adhesion. Wipe the surface clean with a tack cloth to remove any residual dust or particles.

3. Shake the can vigorously for 1-2 minutes to mix the paint and ensure a consistent finish. Test spray on a piece of cardboard or scrap material to confirm the desired color and finish.

4. Apply the paint in thin, even coats, holding the can 10-12 inches (25-30 cm) away from the surface. Move in a smooth, side-to-side motion, overlapping each pass by approximately 50%. Allow each coat to dry for at least 10-15 minutes before applying the next coat.

5. For optimal coverage and a more durable finish, apply 2-3 coats of paint, allowing sufficient drying time between each coat.

6. Allow the final coat to dry for at least 24 hours before handling or using the painted object.

 

IMPORTANT NOTES:

1. Do not puncture, incinerate, or expose the can to temperatures above 120F (50C) or prolonged sunlight.

2. Store in a cool, dry environment.

3. Keep out of reach of children and pets.

4. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.

Package Includes: