3.2V 3.7V LED Drive Panel Remote Control Light Control for Home Wall Lamp Lights

3.2V 3.7V LED Drive Panel Human Induction Radar Sensor Module Light Control Solar Induction Controller for Home Wall Lamp Lights Feature:

1. Remote Control: This solar power circuit board comes with a remote control, which can control the operation of the circuit board at any time. To provide more protection for users, so that the use of more convenient.

2. Multifunctional: Every button on this solar power LED driver panel is smart. Induction highlight and low light modes can be used for 2 hour, 3 hour and 4 hour buttons respectively. At the same time there is a dark long bright no induction mode. In use, you can also switch to induction high and low light modes after 2 or 3 hours of long light. Every button of the circuit board remote control can meet your needs.

3. Simple Installation: The design of this sensor circuit board is simple, only need to install the battery, then connected to the LED light and circuit board can be used. It has no tedious instructions and is suitable for our daily life. The simple installation method saves a lot of time and effort.

4. PC and ABS Material: This radar sensor module is made of ABS material and PC material. It is well made and of fine workmanship. Very durable and wear-resistant. It is an economical and practical tool.

5. Compact and Portable: The weight of this solar circuit board is very light, only 35 grams. It's also small in size and volume. So it's very easy to carry. Whether you keep it in your pocket or in your toolbox, it won't take up space.

description:

Specification:

Certification: NONE

Origin: Mainland China

Application: Lighting Controller

Model Number: Solar Lamp Controller

Application battery voltage: 3.2V lithium iron phosphate battery /3.7V lithium battery.

The circuit board has no charge and discharge protection. Batteries need a protective circuit to prevent overcharging and excessive discharge.

Application LED voltage: 2.8V-3.3V. Power < 10w

Solar panel power application: 5V-6V/< 20W

Induction mode: light-controlled induction + radar body induction

Induction distance: 5-10m

Induction time: high light about 10 seconds + low light long light

Material: PC+ABS

Circuit board size: about 65*20mm

Precautions for testing:

1. When the sensor mode is tested, no moving objects, including hands and feet, can be detected within 12 meters

2. When multiple induction modules are together, they will interfere with each other, resulting in insensitive induction or false triggering

3. The surface of the patch part is the launching surface. Self-adhesive and glue can not be attached here, otherwise the induction distance will be shortened

4. The distance between the front and back of the inductor and the metal shall not be less than 2CM

5. The parts surface of the patch shall not be shielded by metal, otherwise the detection signal will not be transmitted, resulting in a short induction distance

6. Induction signals can penetrate glass and plastic walls

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

Included:

1 x Circuit Board