433Mhz RF Transmitter Electronic Lock Control 12V 10A Universal Wireless Remote Control

Voltage: DC12 V

Transmitting distance: >100 m ( open space)

Receiver Sensitivity: ≤105 dbm

Waiting Current: ≤10MA

Working Frequency: 433M

Remote control battery: 2 x 3 V CR2016 button batteries

Maximum input power: 250 V

Working Mode: Momentary, toggle, latching time delay (5s ,10s ,15s, 20s )

 

Working mode:

1.Inching mode: press the remote control the relay will connect, and then release the remote controlto disconnect the relay;

2.Self-locking mode: press the remote control the relay will connect, and then press the remote control again to disconnect the relay;

3.Interlock mode: press the remote control key A to connect the relay, and press the remote control key B to disconnect relay.

4.Delay mode: press the remote control the relay will connect, release the remote control and start timing.After 5S, 10S, 15S and 20S (4 gears), the relay will be automatically closed.

 

Learning Methods:

1.Inching mode learning method:

Press the code pairing button on the control panel once, and the LED indicator will flash once.After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

2.Self-locking mod learning method:

Press the code pairing button on the control panel twice, and the LED indicator will flash twice.After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

3.Interlock mode learning method:

Press the code pairing button on the control panel three times, and the LED indicator will flash three times.After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

4.5S/10S/15S/20S delay learning method:

Press the code pairing button on the control panel (four/five/six/seven) times, and the LED indicator will flash (four/five/six/seven) times.After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

5.Code clearing method:

After pressing the learning button on the control board for 8 consecutive times, it will automatically clear all the remote control for learning the code.After clearing, the remote control for learning the code is no longer controlled.

- Note: Matching method point, self-locking and Inching mode with single-key remote control, interlocking mode with two-key remote control.

Package include: