HOT Car Perfume Air Freshener Telephone Number Atmosphere Light Pickup Lamp Window Breaker Seat Selt Cutter

Display Debugging Telephone Number Plate

​16-Bit Rgb Full Colored Beads

​Pickup Microphone (Voice Control).

​Audio Automatic Gain Algorithm

​Easy-To-Use Method: Support Type-c Power Supply-Charging While Using

​Parameters:

​Model:T8

​Function: RGB Rhythm Light+Warning Light+Safety+Seat Belt Cutter+Aromatherapy+Telephone Number.

Power:2W

Input Voltage:5v 1a

Battery Capacity:420 Mah

Power Interface:Type-C

Material:PC+ABS

Aromatherapy Size:40x7mm

Productsize:205x50x34mm

Main Engine Weight:190g

​

The Setting Method

Pickup Light Switch:

1.Short Press Turns On The Default Mode Of Pickup Lamp,And Every Short Press Changes a Mode,There Are Altogether,Five Modes,Each Mode Has 8 Kinds Of Automatic Color Change,Which Changes Color Every 5 Seconds,The Most The Latter Mode Is Shutdown,Which Can Be Operated Circularly f In Turn.

​

2 Double-Click The Pickup Lamp Switch To Enter The Warning

Signal Flash Mode When The Pickup Lamp Is Turned On, And Then Double-Click The Pickup Lamp Switch To Exit The Warning Signal Flash Mode And Enter The Pickup Lamp Mode.

Note: Short Pre ssing The Pickup Light Switch Has No Effect In Warning Flash Signal Mode.

3 Short-Press The Switch Function Of Strong Photoelectric Downlight In Any Mode Of Pickup Lamp.

Turnoff The Pickup Lamp Power.

Second,The Strong Photoelectric Downlight Switch:

Long Press And Double-Click Have No Effect.

Press The Strong Photoelectric Downlight For a Short Time And Then Press It For a Short Time To Turnoff The Strong Photoelectric Downlight.

​3 Strong Photoelectric Downlight Built-In Small Luminous

Function:Automatically Lit When There Is No Light At Night. Low Light, Automatically Turn Off The Luminous Function When Turning On The Light.

Third, The Electricity Display

1 Full Charge Display:4 Green Lights Are On.

2 Voltage Display:3.3 Volts Low Electricity Reminder, The First Red Light Flashing, 3.2 Volts Low Electricity From.

Turn It Off Manually. Press The Power Button Briefly When The Power Is Turned Off To Check The Current Power, Totaling 4. Grid, Each Grid Has 25% Power, And If The Power Is Less Than 25%, a Red Light Will Be Displayed.

Iv. Charging Display:(Displayed In The Off State)

When Charging,The Corresponding Green Light Flashes,And When Fully Charged, The Four Green Lights Stay On, Pullout The Charging Stand.