PPR Heater / Fusion Machine With Mould Size 20, 25, 32mm PVC Heavy Duty Pipe Fusion Welding Machine

Designed for prolonged use.

Non-slip handle, comfortable to grab.

Suitable for pipe construction equipment.

For welding PPR / Pb / PE pipes, such as plastic pipes and so on.

U-shaped base design increases the load-bearing effect and works stably.

Widened and thickened panel design to store more heat and quickly melt the tube.

Double-sided heat dissipation design of the heat sink, no machine burning after working for a long time .

Thickened thermal insulation scorched wood PP material, double thermal insulation, stable heat generation.

Material: ABS+Aluminum

Color: Green

Power: 800w

Suitable for: PPR / PB / PE pipe

Heating temperature: 280℃（536℉）

Welding head: 20mm /25mm /32mm

Voltage: 220v (Please make sure it is suitable for your local voltage standard !!!)

Plug Type: US Plug

Instruction：

1. Install the heatsink on the fixed welding device, place the welding device on the rack, install the corresponding heating die according to the required pipe specifications, and use the spanner to tighten, usually small in the front end in the back.

2. Power on: power on (pay attention to the power must be with a ground protection line), the green indicator light, until the green light is off, the red light is on, indicating that the fuse into the automatic temperature control state, you can start operation. Note: In the automatic temperature control state, red light, green light will be alternately lit, indicating that the fuse is in a controlled state, does not affect the operation.

3. Welded pipe: pipe cutter with a straight cut off the pipe, the pipe and pipe at the same time without rotating into the fuse die, and in accordance with the requirements of the table to operate, to the heating time immediately after the pipe and pipe removed from the die at the same time , Quickly and without rotation directly into the required depth of uniform, so that the joints open into uniform flange.

Package Include：

1 x Pipe Welding Machine

3 x Welding head (20mm + 25mm + 32mm)

3 x Screw

1 x Wrench