AC Voltage Detector Non-Contact Smart Voltage Indicator Tester Power Tool Wiring Detector Breakpoint Breaker Finder

Safety first: Multiple alarms via sound and light. The probe glows red and beeps when voltage is detected. When the sensed voltage is higher, or the closer it is to the voltage source, it will beep at a higher frequency. At the same time, the screen is red or green, red means high voltage and live wire are detected, green means low voltage and neutral wire are detected.

Non-Contact: With NCV sensing probe for AC voltage; simply place the tip near a terminal block, outlet, or power cord. You know voltage is present when the tip glows red and the pen beeps. The live wire detector can automatically detect the live wire or the neutral wire. Ideal for breakpoint testing. A convenient circuit tester for electricians and homeowners.

Dual Range: Detects standard voltages and low voltages (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Press the S key to adjust sensitivity to accommodate low ranges for doorbells, thermostats, irrigation wiring, etc.; NCV sensor automatically recognizes voltage and displays it on a bar graph.

Safety Rating: IEC Rated CAT III 1000V CAT IV 600V, CE Compliant; Electrical Tester is Double Insulated for Safety. A high voltage alarm warns you that the voltage is above 90V, the screen turns red, and the safety symbol on the screen lights up.

Compact Design: Bright LED flashlight for working in dim places; Low-Power-Indicator when voltage is below 2.5V; Auto shutdown after 3 minutes of no operation or no signal detection; Pocket-sized pen hook allows you to put the It goes in a shirt pocket.

Specification:

Model: HT90

Range: 12V~1000v

Sensitivity: Hi:12V~1000V/Low:48V~100ov

Frequency: 50Hz~60Hz

Flashlight: LED Flashlight

Working temperature: 0C°~40°C

Storage temperature: -10°C~50°C, humidity: ≤95%

Safety level: EN61010-1100oV CAT.Il; CAT.IV 600V; CE

Power supply: 2x1.5V AAA batteries (not included)

Dimensions: 145x24x27mm

Packing list:

Test pen*1

notes:

1. Due to manual measurement, please allow 1-3mm difference, thank you for your understanding!