Product description
Instructions for RF Wireless Remote
Press this key to turn on unit or switch to standby mode. Unit will turn on and restore to previous status at powering on moment.
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100%, 50%, or 25% brightness lighting mode.
Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
Adjust playing speed of dynamic modes. Press SPEED+ to increase seed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness. Press BRIGHT+ to increase brightness and press BRIGHT- to decrease
Functions for RF Wireless Remote
Installing for RF Wireless Remote
This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative.
Please select proper power supply according to the LED application.
The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating.
CAUTION:Do not short circuit the LED output, this may lead to permanent damage!
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it\’s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal parts. The remote battery is 3V CR2025 type, please only replace with same type battery.
Dynamic speed level: 10 levels
Lighting brightness level : 10 levels
Smooth dimmer effect: Yes
Working voltage: DC 5~24V
Output current : peak 12A
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance : >15m at open area
Note: Battery is not included
1 x Mini In-line LED Light Controller/Dimmer
1 x RF Wireless Remote Controller R106