1Pc Universal Fire Sprinkler Head Guard Built-in Heavy Duty Chrome Protective Frame for Irrigation Heads[OUTU]

1. The installation can be completed without tools and can be suspended.

2. Loosen the two hooks on both sides of the protective cover.

3. Unfold the cage just enough to remove the sprinkler frame and deflector, taking care not to damage the sprinkler.

4. Clamp the open end of the cage at the bottom of the nozzle between the frame and the wire.

5. Re-engage the two hooks on both sides of the sprinkler head. Ensure that the concave outer panel is correctly repositioned on the nozzle holder according to the nozzle manufacturer's instructions.

6. Use only when the built-in nozzle cover can be installed without disturbing the manufacturer's nozzle. Install the nozzle correctly according to the installation instructions and installation instructions.

7. Used for embedded shielding. The two hooks on both sides of the nozzle engage the king. Suitable for most embedded sprinkler applications.

Color: silver

Size: Length and height are about 8*7cm, error is about 1cm

Material: Iron

Package content: 1pc

hint:

1. Conversion: 1 inch = 2.54cm

Approximate size: These sizes are approximate Asian sizes, generally one size smaller than the US/EU size, please refer to the size chart in the picture. All products are measured manually, and there may be a difference of 1-3 cm. Hope you can understand, it will be greatly appreciated.