400KV electromagnetic pulse generator arc igniter module 3-6V Black high voltage module voltage inverter for boost module

•Voltage: Input DC3.6-6V, output DC400kV -600KV

•Line length: input over 100mm, output over 90mm

•Structure: High and low voltage integrated

•Purpose: Commonly used in 105 high-voltage generators, high-voltage igniters, teaching experiments, etc

•One side of the red and green lines is connected to the power supply. The positive pole of the red line and the negative pole of the green line are connected to the power supply

•One side of the two red lines is sparking

•Non continuous operation

•This high-voltage module is made using the Tesla coil principle and outputs high-voltage pulse current. It has a small size, high efficiency, and a simple peripheral circuit (just connect the switch to the battery) with strong discharge intensity.

•High voltage type: pulse current type

•Output voltage: around 200000 volts (please pay attention to safety when using)

•High voltage bipolar discharge distance: 10mm-20mm

•Output high-voltage line length: approximately 100mm

•Input power line length: approximately 100mm (red line represents positive pole)

•Overall dimensions: 24 * 65mm (with a maximum diameter of 24MM and a minimum diameter of 22MM, with a flat surface on one side)

•Regarding power supply: A single 3.7V lithium battery or two batteries in series can be used, such as 18650 batteries, idle mobile phone batteries (with protective plates removed, recommended capacity of 2000mAh or above), nickel cadmium/nickel hydrogen battery packs, 4V or 6V lead-acid batteries, etc.