product features:
*1. Convert Existing Rust: Chassis Rust Converter replaces existing rust with a dark and protective polymer barrier. It converts rust into an inert coating that seals in moisture and prevents future rust and corrosion.
*2. Protects Iron and Metal Surfaces: It restores and protects iron and metal surfaces on cars, dumpsters, equipment, railings, and more.
*3. Prevents Future Corrosion: This anti-rust treatment prevents future corrosion by locking in moisture from rain and snow. Dry in 20 minutes.
*4. Non-Toxic, Smoke-Free Formula: It is a non-flammable, low VOC water-based treatment. It is non-toxic and emits no harmful fumes.
*5. No more scratching, sandblasting, or sanding: create a weatherproof barrier and get ready for a fresh coat of paint on your car's chassis. This chassis rust converter will provide more than double the rust protection.
━━━━━━━━━━━━━━━━━━━━━━━
how to use:
*1. Finishing: Remove large rust and scale particles with a wire brush or sandpaper. Thoroughly clean surfaces to remove dirt, dust and grease.
*2. Application: Shake or stir well before use. Apply two coats using a brush, roller or pump spray, allowing at least 20 minutes to dry between coats. A 48-hour cure time is required before a premium paint can be applied.
*3. Cleaning up: Application equipment should be cleaned immediately with soap and water.
*4. General: Do not use this product if surface temperature is below 50°F. Store in a cool, dry place protected from freezing or temperatures above 100°F. For lasting protection of iron surfaces, a cured coat of rust remover should be sealed with two coats of high quality oil based paint. No other primer is required.
━━━━━━━━━━━━━━━━━━━━━━━
Precautions: 1. Prepare a basin of clean water by your side in case chemicals splash into eyes or skin. 2. Do not swallow or use near eyes. 3. For safety, please use eye and hand gear. 4. Keep airtight and dispose of properly, please keep out of reach of children! ! ! In case of skin contact, wash immediately and thoroughly with soap and water. For eye contact, flush with water for 15 minutes or longer. If swallowed, drink plenty of water to dilute and drink raw eggs as soon as possible. Call a physician or doctor. Splashes on the skin should be rinsed immediately with plenty of cool water, and in case of burns or irritation, the affected area should be treated with a gel containing calcium gluconate or monosodium glutamate until the pain subsides. Contact with the rust remover does not cause immediate burning or pain, but can easily penetrate deep tissue and cause severe pain an hour or more later. Prolonged exposure to rust removers can cause irreparable damage to the skin and eyes and should never be used without adequate safety precautions.
Disclaimer: Please handle with care. We will not be liable for any damage, incident or accident caused by negligence or mishandling during transport or delivery to your premises and after its use. By purchasing our merchandise you have read and acknowledged our disclaimer and terms and conditions.
If you are satisfied with our products, please give us five stars as encouragement, ️️️Thank you very much!
Due to computer screen resolution, brightness, contrast, etc., the actual color may be slightly different from the picture. Hope to get your understanding
We have good after-sales service. If you have any questions or dissatisfaction after receiving the product, please feel free to contact us, we will provide you with the best solution, sir/madam.