NEXAS Nexlink Car Motorcycles Bluetooth 5.0 OBD2 Scanner EOBD For IOS Android Windows Fault Code Reader Diagnostic Scan Tool

Mode 01: Read dynamic data stream, display the wrong light, and be in state.

Mode 02: Inquire about freezing frame data.

Mode 03: Read the current error code.

Mode 04: Clear the wrong code.

Mode 05: O2 sensor test.

Mode 06: Test the specific monitoring system of the vehicle.

Mode 07: Read the undecided fault code.

Mode 08: Check the internal vehicle system or parts.

Step 1: Download APP and install it on your phone/pad.

Step 2: Locate the OBD2 diagnostic port and plug the device into the 16-pin Data Link Connector (DLC) on your vehicle. Make sure the connection is good. "RED LED" is always lit to indicate power. "BLUE LED" flashes when the device is connected for paring or communicating with ECU. If there is no communication, "BLUE LED" may be off.

Step 3: Turn the ignition key to the "ON" position (or start the vehicle in neutral).

Step 4: Activate Bluetooth on your phone/pad. ( On iOS devices: you will see "NEXAS***" in the list of Bluetooth devices, but DO NOT pair it with here. Please go directly to the settings of the app. On Android or Windows devices: pair with "NEXAS***" in the Bluetooth settings of the devices and connect it by entering PIN with 1234 or 0000 )

This scanner only works on OBD2/EOBD cars, usually they are American cars from 1996, European cars from 2000 and Asian cars from 2006. Compatible with iOS, Android, Windows, the Bluetooth connection of Android and IOS is different. For more details, please refer to the instruction manual on APP or the attached user manual. Third-party app is required for all functions. Some may need to be purchased separately. If you have any questions, please contact the seller.

【Unique Motorcycle Diagnosis】