COD Lensent OBD2 Mini ELM327 Yamaha Honda Motorcycle Diagnostic Motorbike Cable Cables 3pin 4Pin To 16Pin OBD2 Adapter OBD Connector OBDII Car AutTrouble Scanner V2.1 Bluetooth

More caring for your car, more safety for your driving

📣 General Vehicle Diagnostics

Read DTCs/Clear DTCs/Read Car Data

Quickly diagnose and analyze automotive problems

Save money and time for mechanic's minor problems

📣 Motorcycles are also available

With motorcycle detection cable

The store has a variety of brands of cables for you to choose from

📣 Function:

1. Read GM and car manufacturer specific diagnostic trouble codes and display their definitions (software contains more than 3000 trouble codes)

⒉ Clear the fault code and turn off the engine (engine) fault alarm indicator

3. Read the real-time dynamic data stream of the engine

4. Engine speed

5. Calculate the load value

6. Coolant temperature

7. Fuel system status

8. Speed

9. Short term fuel trim

10. Long-Term Fuel Correction

11. Intake manifold pressure

12. Timing Advance

13. Intake air temperature

14. Air flow

15. Throttle opening

16. Oxygen sensor voltage/short term fuel trim

17. Fuel pressure

📣 Instructions for use and installation

This product supports models produced after 1996 using OBD-I protocol (including VPW, PWM, ISO, KWP 2000, CAN protocol).

The product can be connected to a laptop or desktop computer,

Used to read the fault code and know the meaning of the fault code, clear the fault code of the car, display the data flow of the sensor (such as speed, water temperature, etc.)

📣 Motorcycles are also available

With motorcycle detection cable

The store has a variety of brands of cables for you to choose from

◈ 3 Pin Yamaha

- Y15-V2

- YZF-R125

- MT-125

- YS-125

- Delight-125

- N-MAX 125

- X-MAX 125

- X-MAX 300

- X-MAX 400

- AEROX 50 (2018)

◈ 4 Pin Yamaha

- FJR 1300 (2016-)

- FZ09 (2017-)

- FZ10 (2016-)

- MT07 (2016-)

- MT09 (2016-)

- MT09 Tracer (2016-)

- MT10 (2016-)

- R1 (2016-)

- R6 (2017-)

- TMAX 530(2016-)

- XSR 700

- XSR 900 (2016-)

- XT1200ZE (Super Tenere) (2017-)

◈ 4 Pin Honda

- PCX 125 Tahun 2018 ke atas

- PCX 150 (Indonesia) .

- All New Vario 150/125 tahun 2018 keatas (keyless)

-All New CBR250

- CRF 250

-Moge Honda.

- CBR1000RR 2017-onwards

- CBR600RR 2017-onwards

- VFR 800 2017-onwards

- CRF1000 (Africa Twin) 2017-onwards

- CB1100 2017-onwards

- NC750 2017-onwards

📣 user's guidance

1. Download and install the app

Android: (Torque) app

IOS: dishcommand/Car Scanne/ZUS

2. Plug OBDII, turn on the car engine

3. Connect OBDII via mobile phone Bluetooth

4. Start the application, configure OBDII and start running

*In order to protect your car and OBDII, please turn off your car and unplug OBDII (if you have any questions, please consult customer service)

📣 V2.1 Version 7 Protocol

1) ISO9141-2 (5 baud rate initialization, 10.4Kbaud)

2) ISO14230 - 4 KWP (5 baud rate initialization, 10.4K baud)

3) ISO14230 - 4 KWP (fast initialization, 10.4K baud)

4) ISO15765-4 (11bit, 500K baud)

5) ISO15765-4 (29bit, 500K baud)

6) ISO15765-4 (11bit, 250K baud)

7) ISO15765-4 (29bit, 250K baud)

Compared with the V1.5 version, the supported models will be less.

📣 Product parameters

Product name: elm 327 car fault detector

Model: mini-ELM 327

Application Platform: Compatible with Android, Apple

Voltage: 12V

Weight: 32g

Size: 6.5*3*9.7cm

Working temperature: -40~65(℃)

Packing method: PP bag + CD/color box (two kinds of packaging will be shipped randomly)

📣 Installation steps

1. Install the CD-ROM or the downloaded ScanTool(dot)net software.

2. Connect the OBD-l cable to the car ODB-lI interface.

3. Connect the OBD-III cable to the ELM327. At this time, the power light (power) will be on,

The ODB TX/RX light will flash, indicating that the connection is normal.

4. Connect the USB cable to connect the ELM327 to the computer. At this point, the computer will prompt to find new hardware, follow the computer prompt to install the USB driver from the CD or downloaded from the network. Enter the "Device Manager" of the computer and click on the port, you will find the newly installed hardware "USB Serial Port", write down the COM number on the right. (The COM number will be used in the next software setting)