DIY ELECTRONICS LG CHOCO RECHARGEABLE BATTERY 18650 3000mAh, 1S 3.7V 2S 7.4V 3S 12V BMS, FOR BATTERY OPERATED TOYS

FEATURES:

a. LG CHOCO BATTERY 18650 3000mAh

👉Standard Charge: Fast Charge

👉End condition(Cut off): 50mA

👉Constant voltage: 4.2V

👉End condition(Cut off): 100mA

👉Max. Charge Voltage: 4.2 ± 0.05V

👉Max. Charge Current: 4000mA

👉Standard Discharge · Constant current: 600mA(0.2C)

👉End voltage(Cut off): 2.5V

👉Max Continuous Discharge Current: 20A

👉Weight: Max.47.0g

👉Dimension: Max.(D)18.5*(H)65.2mm

b. 1S - 3.7v BMS - 1 BATTERY

👉1S BMS: Charger

👉Over charge voltage: 4.25+/-0.05V

👉Over charge release voltage:4.23+/-0.05V

👉Over discharge voltage:2.54+/-0.1V

👉Maximal continuous charging current: 2A

👉Maximal continuous Discharging current: 2A

👉Over current protection: 3A

👉Size WxL: 3.7x30mm

👉Color: green

👉Material: plastic ABS

c. 2S 7.4v BMS 2 BATTERY

👉Over charge voltage:4.25-4.35v±0.05v

👉Over discharge voltage: 2.5-3.0v±0.05v

👉Max continuous current:8A

👉Max peak current:15A

👉Working temperature:-40---+50

👉Storage Temperature:-40-- +80

👉Small current: less than 3uA

👉Life cycle :more than 50000hours

👉Resistance: Less than 300mΩ

👉Short cut protection :Protectable, charge can repair

👉B+ Connect Battery positive;

👉B- Connect Battery negative;

👉MB Connect the point between battery1 Battery2;

👉P+ Charge/discharge positive;

👉P- Charge/discharge negative

d. 3S 12v BMS 3 BATTERY

👉3S 20A BMS

👉Charging Voltage: 12.6V

👉Maximum Output Current: 20A

👉Quiescent Current:

👉Continuous Charging Current (upper limit) : 10A

👉Continuous Discharge Current (upper limit) : 20A

e. Micro JST 2.0 Wire 2-pin Male and Female

👉Wire Type : 26AWG

👉Pitch: 2.0mm

👉Material: Tinned copper wire, plastic head at each end

👉length: 200mm/20cm/7.9inc

f. Open Wire

👉#22-awg open wire for your DIY purpose

BENEFITS:

👉Short Circuit Protection: Protectable, Delayed Self-Recovery

👉Overcharge Protection

👉Over-discharge Protection

👉Over-current Protection

HOW TOs:

👉Used for Lithium Batteries with Nominal Voltage of 3.7V and Full Voltage of 4.2V (including 18650, 26650, Polymer Lithium Batteries,No Size Limit)

👉Used for Massager Battery Pack, LED Light Backup Power Supply, 12V Electronic Products, Solar Street Light Battery Pack, Monitor Standby Power Supply, etc.

👉This Protection Board Can be Used for Lithium Iron Phosphate Battery, Xenon Lamp, Hand Drill Battery Pack, Electric Fish Battery Pack, Electric Bicycle Battery Pack, Baby Car Battery, 775 (4A) or Above Motor, 1W Fisheye LED Lamp