FLYMAN 2000W 220V Adjustable Hot Air Gun Heat Gun with 1pc Nozzle Heavy Duty Heat Gun Heavy Duty Heat Gun Plastic Hot Air Heater Car Film Welding Universal Heat Shrink

 

Features:

[Quick temperature heating dual temperature control] The power of 2000W hot air gun is powerful, and the heating is quickly heated. The hot air gun can be switched through a button between 300 /600 settings, which can help you complete the home improvement task of home and meet different needs in your life. Compared with the traditional Yunmu heating element, our heating gun uses dual -electric heating wire heating elements, which has high heating efficiency, good stability, and longer service life. With all copper motors, there is low noise and high efficiency. Light, compact, without extra buttons, easy to use and process.

[Overload protection and removal] Hot air guns have overload protection functions, preventing the main power line from overheating and damaging internal components and circuits. The design of the rear cover plane and bracket is very suitable for standing upright to liberate the hands, so that you can bend a PVC tube at any angle without using any adhesive or elbow joint.

[Durable] This thermal gun part is durable, and the shell is made of heat -resistant and hard ABS plastic. Using high -quality heating wires, even if the temperature changes rapidly from heat to cold, it will not break due to thermal expansion and contraction, and together with all copper motors.

[Small volume, human engineering design] The hot air gun is small and light weight, which can prevent repetitive lesions; ideals for heat shrinkage tube, contract, heating PVC, electronic products, mobile phone repair, remove paint or floor tiles, loose rust rust, rust rust The use of bolts and other heating or thawing. This hot air gun has a scientific ergonomic design and non -slip rubber handle, which is comfortable and convenient for you to use it for a long time.

[Wide scope of application] Partial rotation nozzle guide the narrow heat mode to the working surface; the concentrated nozzle will guide the concentrated heat flow to the working surface; the reflection nozzle will spread the heat flow evenly to the entire working surface; Essence Ideal use of contraction packaging, epoxy resin, contraction tube, crafts, mobile phone repair, ethylene packaging, paint removal, electronic maintenance, etc.

Product parameters:

Material: ABS+Stainless Steel

Power: 2000W

Voltage: 220V

Air flow: 20-500L/min

Temperature adjustment: 300 /600

Plug: national standard

1. 100% brand new high quality product.

2. Made of high quality material, durable and practical.

3. This handcraft high temperature hot air g-un is used in the craft factory to make handmade product stereotypes, quick drying products, drying works, simple sample heat shrinkable film packaging, etc.

4. Rapid heating and setting, the state is online in one second, meticulous, the quality is hidden in the details, and the hand feels light.

5. Humanized design, long-lasting and not tired, small in size, can also be carried with you when you travel.

6. Built-in thermostat and thermal fuse, when the body overheats, it will automatically cut off the power supply to prevent hidden dangers, so you can use it with confidence.

7. Concentrated wind direction, rapid heating and random creation, metal structure, and part of it is made of stainless steel.

feature:

- Can be used for cooling powder and shrink sheet

- Keep a 3-5 cm distance from the work and about a 45 degree angle to heat until done.

- When done, blow it with a high temperature heat g-un for a few minutes,

- Not only can increase toughness, but also increase gloss

- The temperature cannot be adjusted, theoretically it can reach 200 degrees in a few seconds.

- Do not work for more than 10 minutes, blow at a 45 degree angle to avoid heat absorption.

- be careful when using

parameter:

Material: steel plastic

Operating temperature. : 200

Rated power: 300W

Rated voltage: 220V

Plug Type: US Plug

Package list:

Hot air blower*1

Flammability: Flame Retardant

Full Shrinkage Temp: 120C

Material: Polyolefin

Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)

Minimum Shrinkage Temp: 84C

Packing: 530pcs Heat Shrink Tubing

Supplied format (round or flat): Product is supplied flat

Manufacture specification: ISO9001

Dielectric strength: 15 KV/mm

Tensile strength: 10.4 Mpa

Cutting method: Scissors

Operating Temperature: -55C to +125C

Approvals: UL Approved

Please look at the photo, it shows the variation you choose.

Please note: