Nail polish gel polish Fibeaka many colors must use UV/LED nail lamp & base - top - matte

Material: gel polish

42 morden color

Color as picture

STEPS TO MAKE NAIL

Step 1: Clean the nails (pick up dead skin, file nails, create forms, sand the nail surface), this step must be done carefully so that the paint has a strong adhesion to the nail surface, increasing the durability of the nail polish layer.

Step 2: Paint the bonding layer (Base) and then heat the UV Led 90s

Step 3: choose your favorite color, remember to shake the paint bottle to stabilize the paint color, then heat the UV Led lamp for 90 seconds - you should apply 2 or 3 layers of paint to get the color up to the standard tone with the best sample photo.

Step 4: Apply a layer of Glossy Paint (Top) – heat the UV Led lamp twice for 90s~120s to make the gloss dry and the most durable.

Step 5: Use acetone-soaked gel wipes to scrub your nails so that they don't get sticky and shiny

Attention: You can rest assured that when the base layer or gel polish is applied after UV/LED heating, the essence of the paint will harden and stick to the nail, but it's still a bit hiss, don't worry, this is  normal, so that subsequent coats of paint are better bonded. By the time you apply the last layer of polish for Step 4 and Step 5, the nail will be beautiful.