Centro Clear Gloss Lacquer 350 ml

Centro Clear Gloss Lacquer 350ml

Direction For Use:

New Surface: Wood or Metal. Apply Centro Clear Gloss Varnished thinned 20% with paint thinner or pure turpentine to closed grained wood or metal. Allow the first coat to dry completely before sanding lightly with very fine sandpaper. As needed, apply one or more finishing coats. To achieve the best results on coarse or open-grained wood, apply paste filler first, followed by dry hard ten sandpaper. As needed, apply one or more coats of Centro Clear Gloss Varnish.

Old Surface: Clean the surface with soap and water, then rinse and thoroughly dry it. If the surface has previously been waxed or oiled, wash with turpentine and sandpaper until smooth, then apply as if it were a new surface.

Linoleum: Thoroughly clean the surface. If previously waxed, use turpentine to remove the old wax before applying one or two coats of Centro Clear Gloss Varnish.