Product description
Professional Portable Digital Display Auto-calibrate Weighing Scale with Clear Weight Pans WH-I2000
Units of measurements: g, oz, ozt, dwt, ct and gn
With tare function (both automatic and manual)
With backlight LCD display
Includes clear holding pans
Battery powered (uses AAA batteries)
Maximum weight capacity: 3kgs or 3000 grams
1. Place scale on a stable, flat and level surface (Otherwise, scale will not work properly and will not auto calibrate)
2. Press On/Off button to turn on scale
3. Wait 30 seconds before weighting in order to allow for autocalibration and auto-tare
4. Scale will automatically turn off after 1 minute when not in use. Press On/Off button to manually turn off.
5. Press mode to change units of measurement
6. Use tare button for a 0.0 reading (this subtracts the weight of the weighting container)
A) 1. For manual calibration (only recommended when needed. Otherwise, do not manual calibrate): Press and hold MODE to enter calibration mode, then press MODE again and the calibration weight value will flash (i.e., 100.00 or 500.00
A) 2. Place calibration weight on the scale until "PASS" is displayed. The scale is now calibrated.
B. Display "EEEE" indicates over the maximum capacity of the scale
C. If the ambient temperature changes by 5C or more, let the scale calibrate to the air temperature fir 30 minutes before use.
D. Clearn using dry cloth or paper towel only. Do note use water or any chemicals.