BART SIMPSON SIDE FACE STICKER DECALS (3.636 inch height by 1.641 inch width)

️MACHINE CUT VINYL STICKERS️

FEAUTURES

Materials: High-quality PVC

Acceptable surfaces️️️

Glass; Metals; Vinyl; Plastic; Fiber Glass; Wood Painted with smooth surface; Glossy Enamel;

Not Recommended surfaces

•First, make sure your surface is ready for the decals.

•It should be a clean, smooth & dust-free surface.

•When you receive your decal or sticker, it will likely be covered with a layer of transfer tape and will still be attached to the material backing.

•To apply your decal is to remove the transfer tape and the decal from the backing.

•Slowly peel the tape from the backing while making sure the decal doesn’t stick to the backing.

•Line the decal up on the desire surface.

•Carefully line up the sticker at the top and slowly lower it until it lies flat on your surface.

•Press on the tape with your fingers to start the application process.

•Use a cricut scraper or a credit card to ensure the vinyl sticks securely to the surface.

•Start at one of the corners and slowly pull the tape off of your surface.

•If it sticks to the transfer tape, put the tape back on the surface and use credit card again.

•Smooth any leftover bubbles with scraper or credit card.

#notprint #machinecut