About this product
- NTC Number:NTC0218194442019
- Distance:5KM
- Warranty Type:Supplier Warranty
Product description
Dimensions: 58mmX110mmX32mm
Weight: 130g(approximate)
VHF: 136-174MHz, 400-520MHz(Rx/Tx)
UHF: 136-174MHz, 400-520MHz(Rx/Tx)
68-108MHz (Only commercial FM radio reception)
- Memory Channels: Up to 128 Channels
- Frequency Stability: 2.5ppm
- Frequency step: 2.5KHz/5KHz/6.25KHz/10KHz/12.5KHz/20KHz/25KHz/30KHz/50KHz
- Operated Temperature: -20°C-+60°C
- Supply Voltage: Rechargeable Lithium-Ion mAh 7.4V/1800
- Consumption In Standby: 380mA
- Consumption In Transmission: ≤ 1.4A
- Mode Of Operation: Simplex or semi-duplex
- Duty cycle: 03/03/54 min.(Rx/Tx/Standby)
- Channel Spacing: 25KHz (wide band)12.5KHz (narrow band)
- Sensitivity: =0.25μV (wide band) =0.35μV (narrow band)
- Operation Voltage: 7.4V DC ±20%
- Antenna Connector: SMA-Female
- Accessory Connector: Kenwood 2 Pin Standard
- Audio Power Output: 1000mW/10% (1 Watt)
- Emission Class: 16KΦF3E/11KΦF3E(W/N)
- Maximum Deviation: ≤±5kHz/≤±2.5kHz(W/N)
- Spurious Emission: <-60dB
- Receiver Sensitivity : 0.20 uV(at 12 dB SINAD)
- Maximum Deviation: ≤±5kHz/≤±2.5kHz(W/N)
- Spurious Radiation: 65dB
THE DUAL PUSH-TO-TALK DIFFERENCE
The UV-82 Series come with a dual push-to-talk button. The dual PTT is a huge leap forward in the HT technology. It allows you to transmit on two frequencies by the use of the rocker PTT switch. By pressing up you can transmit on “Frequency A” and by pushing down you can transmit on “Frequency B”. Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones.
The BaoFeng UV-82 has upped the bar on affordable ham radio technology! The UV-82 comes with a much louder speaker (1 watt), a much more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of the previous chipsets.
VERSATILE RADIO FOR AMATEUR USE
The BaoFeng UV-82 is legal for use on amateur frequencies. The UV-82 is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).
The BaoFeng UV-82 has one built-in receiver but can “watch” two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.
You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.
The BaoFeng UV-82 supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-82 supports the latest standards
The BaoFeng UV-82 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones
The BaoFeng UV-82 has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.
Customize Your Operation with channels, Programmable Buttons, and more!
You can program your BaoFeng UV-82 exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.