Amcord SC APC to UPC Fiber Patch Cord SX Single Mode PLDT and Converge WIFI Cord Core 3.0mm

Origin: CN(Origin)

Model Number: SC/UPC-SC/APC

Certification: CE

Fiber Type: Single Mode G652D

Connector Type:

SC/UPC-SC/APC

Fiber Count: 1 Core

Cable Diameter: 3.0mm

Color: Yellow

Length: 5m 3m 10m

Description:

SC cable assemblies are designed for the most advanced fiber optic systems providing exceptional stability and low reflection (single-mode). SC cable assemblies are well suited for high-density applications. The SC connector uses a rectangular, molded design for quick, easy push-pull installation. This design prevents ferrule rotation and axial damage on the fiber contact points, reducing the potential for damage from mechanical vibration.

Applications:

ODF of optical transmission system

Connection of optical transmission equipment

Telecommunication network

Computer network

CATV

High quality graphic transmission network

High speed data transmission network

Features:

Quick, highly repeatable, low-loss connections

Simplex

Single-mode

PC and APC polishing

Various boot(cable) size available

Various connectors available

Interferential parameters

Hybrid patch-cords are available upon request

How to use a fiber optic patch cord?

1. The transceiver wavelengths of the optical modules at both ends of the fiber patch cord must be the same, that is to say, the two ends of the optical fiber must be optical modules with the same wavelength. The simple way to distinguish is that the colors of the optical modules should be the same. In general, short-wave optical modules use multimode fibers (orange fibers), and long-wave optical modules use single-mode fibers (yellow fibers) to ensure the accuracy of data transmission.

2. Before use, the ceramic ferrule and the end face of the ferrule must be wiped clean with alcohol and absorbent cotton.

3. Lightly insert and pull out the optical fiber during installation. Excessive force will easily cause the optical fiber ferrule to shift, thereby affecting the quality of optical communication.

4. Do not bend and loop the optical fiber excessively during use, which will increase the attenuation of light during transmission.

5. After using the optical fiber jumper, be sure to protect the optical fiber connector with a protective sleeve. Dust and oil will damage the coupling of the optical fiber.

6. Do not look directly at the fiber end face when the laser signal is transmitted.

7. If the optical fiber connector is dirty, you can use a cotton swab dipped in alcohol to clean it, otherwise it will affect the communication quality

8. It is guaranteed to be used within the working temperature: -40℃～+80℃, relative humidity: 5%～90%.

9. The damaged fiber patch cord caused by man-made or other irresistible factors should be replaced in time.