Product description
A. 2WD Smart Robot Car Chassis Kit DC Geared Motor: 3~6V. Motor Gear Ratio: 1:48. Wheel Diameter: 66mm. Wheel Width: 26mm. Tachometer Speed Encoder. Size: approx. 20 x 14cm(L x W). Weight: ~280grams. Package Include: • 2x EMC testing geared motors. • 2x Rubber Wheel. • 2x Speed encoder disc. • 1x Caster wheel. • 1x Four battery holder (batteries not included). • 4x M3x30 Long screw. • 4x M3x8 brass standoff spacer. • 10x M3x8 Philips Screws. • 10x M3 Hex Nut. • 4x Motor fastener T-plate. • 1x On/Off switch. • 4x 15mm connecting cable. • 1x Installation manual
• 2x EMC testing geared motors.
• 1x Four battery holder (batteries not included).
• 4x M3x8 brass standoff spacer.
• 10x M3x8 Philips Screws.
• 4x Motor fastener T-plate.
• 4x 15mm connecting cable.
1. The mechanical structure is simple, very easy to install.
2. Using four reducer DC motor turning flexible, good direction. Four-drive, horsepower chronological. Large and stable chassis is very easy to extend
3. The car comes with speed encoder, with speed photoelectric shop, you can quickly compose a speed system. You can speed, distance, make a loop system.
Double-layer structure: easy expansion
Car width of the two outer wheels distance 155MM
Size car chassis without the tire is 26cmx15.5cm
Car chassis containing the tire size is 26cmx17.5cm
Car chassis (acrylic material) 2
DC geared motor (magnetic over EMC testing) 4
20 line speed encoder (non-ordinary six-lane ten-wire) 4
C. Round Robot Chassis Kit 2WD with DC Motors
This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the acrylic plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a power supply, microcontroller board, and motor controller. The differential drive (two separately driven wheels) allows for a near zero turning radius while the high-strength acrylic body plus high-quality high-speed motors make it suitable for flat indoor surfaces.
We of course have suggestions to run the motors like our Motor Driver, Motor Shield, or Motor HAT. Basically anything that can do two bi-directional brushed DC motors at ~5V and 1.5 Amp peak.
Acrylic frames and all mounting hardware for assembly