About this product
- Voltage:220
- Application Area:Hair
- Plug Type:Philippines Plug
- Warranty Type:No Warranty
Product description
πΏ PLEASE READ THE MANUAL 1ST BEFORE USING THE PRODUCT (especially the maintenance procedure of putting oil and aligning the blade.)
πΏ WHAT YOU SEE IN THE PICTURES POSTED IS WHAT YOU GET.
πΏ Electric Hair Razor | Hair Clipper Full Set for Men Grooming
πΏ Stainless Steel Blade
πΏ Adjustable Blade Control Lever
πΏ Variable Cutting Length
πΏ NOT Rechargeable, plug directly to electric outlet.
πΏ Products are 100% tested before shipping out.
πΏ NOTE: Please read the manual carefully before using.
β
WHAT'S INCLUDED for Variation (BLUE | WHITE | SILVER GREY)
πΏ 1 x Electric Hair Razor Clipper
πΏ 1 x Mini Brush for Cleaning the Razor
πΏ 4 x Attachment Comb Size: 3mm, 6mm, 9mm, 12mm
πΏ 1 x Protection Cap for Razor Blade
β
WHAT'S INCLUDED for Variation (CREAM - Advanced)
πΏ 1 x Electric Hair Razor Clipper
πΏ 3 x Attachment Comb Size: 3mm, 6mm, 10mm
πΏ 1 x Protection Cap for Razor Blade
πΏ NOTE: NO SCISSORS INCLUDED
πΏ The Housing and the Blades will get heated while being used, which is normal.
πΏ DO NOT use it continuously and stop for a while after every 8-10 Minutes.
β
IMPORTANT REMINDERS & MAINTENANCE TIPS:
πΏ PLEASE READ THE MANUAL 1ST BEFORE USING THE PRODUCT
πΏ If you encounter razor unable to cut hair, please take note of the following maintenance reminder in order for the product to work properly:
πΏ Your razor were carefully examined to ensure that the blade were oiled and aligned before leaving our factory.
πΏ Blades must be realigned if they have been removed for cleaning or replacement.
πΏ To realign the blades, simply match the upper and bottom blades teeth up point for point (End of top blade should be approximately 1.2mm back from bottom blade. Compare your clipper blades with the sketch - see manual)
πΏ If blade alignment is incorrect, add a few drops of oil to the blades, turn clipper on for a few moments, turn off and unplug.
πΏ Loosen screws slightly and adjust.
πΏ Tighten screws after blade is aligned.
πΏ To maintain your clipper in peak condition, the blades should be oiled every few haircuts.
πΏ Put 1-2 drops of oil on the Blades before and after use.
πΏ Do not use hair oil, grease, oil mixed with kerosene or any solvent, as the solvent will evaporate and leave thick oil which may slow down the blades motion.