About this product
- Warranty Duration:No Warranty
- Warranty Type:No Warranty
Product description
Name: SL688 A4 /A3 Laminating Machine
Three-speed Cruise Position Adjustment
Work as laminator, Trimmer and Puncher, ADDITIONAL CORNER PUNCHER, AND RING BINDER
Max Lamination Thickness: 0.6mm
Lamination Speed: 2370-440mm/min
Pouch Thickness: (2x80)160 / (2x125) 250mic
Voltage: AV220- 240V 50Hz
Product Size: 42 * 18.5 * 13.5cm
Packaging Size: 42.5 * 17.7 * 12.2cm
Cutting Width of Paper Cutter: 300mm
Hole Punching Diameter: 6mm
Rounding Corner Size: 4mm
NTC real time temperature control
ABS (Anti-blocking sliding) Switch: The ABS lever is specially designed to avoid paper jams

•6 in 1 MULTIFUNCTIONAL: SL688 laminator comes with 6 functions to meet your needs which including hot laminating and cold laminating, paper cutter, corner rounder, hole puncher and Hoop Binding, you can enjoy all convenience in this one laminator set.
•HOT & COLD MODES: 2 laminating ways, thermal and cold laminating mode. They are perfect for different types of laminating pouches. Suitable for photos and documents. The minimum laminating thickness is 160 (2x80) microns and the maximum thickness is 125 microns.
•FAST LAMINATING SPEED: With impressive 1-minute heat-up time, and up to 400mm/min laminating speed, faster than most of the laminator in the market, finish A4 paper size laminating in 45sec (approx.), highly promote your working efficiency.
•INTELLIGENT CORE CHIP: Equipped with NTC intelligent temperature control system, accurately maintain the temperature as laminating. And laminator will auto cut off the power after 15 minutes of inactivity.
•NO MORE PAPER JAM: ABS release button. When the jam is happening, just push the ABS button and pull out the paper. With an innovative operating system, which can bring you a quiet environment during work without noise.
Max. cutting width: 300mm
Cutting Thickness: 6 sheets of A4 80g paper, or 1 sheet of 200-300g coated paper, or 1 sheet of paper after laminating
Cutting Thickness: Single sheet: 80g printing paper, copy paper, 300g coated paper, 125mic film after laminating
Perforation thickness: 10 sheets of 80g copy paper, single sheet of coated paper (within 300g), within 250mic film after laminating
Size: 20mm/25mm/30mm inner diameter
Step 1: Turn the laminator on
Step 2: Pre-heat and wait the “READY” light turn into green
Step 3: Align your photos / documents in the middle slot of the feeder
Step 4: Place the sealed end of the laminating pouch into the laminating feed. Do not pull during laminating process.
NOTE: Please see the min and max thickness of the laminating film to avoid jamming.