Product description
B7000 and T8000 is transparent semi-fluid
T7000 is black semi-fluid
●After curing Hardness: 65-80A
●Surface dry time: 3-6 minutes
●Full cure time: 24-48 hours
●Storage: stored at 10 degrees to 28 degrees
●Multi-purpose transparent/black glue.
●High elasticity, soft film, anti-vibration and waterproof.
●Less odour, strong viscosity.
●Room temperature curing.
●Convenient and easy to use.
●Can be used to paste metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber, paper type, glass, Rhinestones etc.
1. Please read carefully before using the product description Introduction.
2. In front of a large area of use, please do a small area of the experiment.
3. Make sure that the sticky surface clean and dry.
4. The optimum operating temperature should be between 18-32 degrees.
5. The product can be used directly as needed openings evenly coated in sticky surface.
6. Wait 3-6 minutes, the two are aligned adhesive sticky little pressure.
7. Put a few hours straight, 48 hours after the optimum adhesive strength.
May be irritating to the skin and eyes.
Use in a well-ventilated environment.
In case of contact with eyes, rinse with plenty of water.
Please stay away from fire.