LITIUM BATTERY CHARGING MODULE 18650 TYPE-C USB, CHARGING BOARD 4.5-5.5V w/ PROTECTION DUAL FUNCTION

LITIUM BATTERY CHARGING MODULE 18650 TYPE-C USB, CHARGING BOARD 4.5-5.5V w/ PROTECTION DUAL FUNCTION

FEATURES:

👉Input interface: Type-c USB

👉Voltage: 5V

👉Charging cut-off voltage: 4.2V ±1%

👉Maximum charging current: 1000mA

👉Battery over-discharge protection voltage: 2.5V

👉The battery overcharge protection voltage: 4.28 V

👉Battery overcharge lifting voltage: 4.00 V

👉Battery discharge termination voltage: 3.2 V

👉Battery overcurrent protection current: 3V

👉Board size: 2.5 * 1.65 CM

BENEFITS:

👉The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.

👉There are solder joints for input voltage wiring, which is convenient for DIY.

👉Two-in-one charging and discharging protection function.

👉No load the light not bright, red light for recharging, is full of green light.

👉Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.

HOW TOs:

👉When the battery is connected for the first time, there may be no voltage output between OUT+ and OUT-. At this time, the protection circuit can be activated by charging with a 5V voltage. If the battery is short-circuited from B+ B- and then connected again It needs to be charged to activate the protection circuit.

👉When using a mobile phone charger for input, please note that the charger must be able to output 1A or above, otherwise it may not be able to charge normally.

👉Connect the battery to B+ B-, insert the mobile phone charger into the USB socket, no load the light not bright, red light for recharging, is full of green light.