100W/150W 220V Automatic Booster Water Pump Stainless Steel Electronic Home Shower Washing Machine

⭐All products are in stock, so don't hesitate to buy now!

⭐Follow this store to get discount coupon

⭐We will ship the goods from our Manila warehouse within 24 hours after you place your order

⭐If you have any questions, please contact us. We guarantee you will get a satisfactory solution. Please don't give us low star rating

⭐Please contact customer service for a gift after you receive the item by providing a 5-star review and pictures

Product Description :

The booster pump is a pump used to increase/promote the water pressure to make the water pressure in the pipe more stable. This booster pump already has 3 switching modes (manual on mode, off mode and automatic on/off mode). With a power of up to 90W and a thrust of 18 l/min, this booster pump makes it easier to speed up your water filling or tighten up your tap or shower pressure.

Features:

Simple operation and power saving.

Improve the water circulation system.

The engine sound is smooth and therefore not noisy

It is equipped with an automatic switch and valve.

The pump can automatically increase the pressure when the faucet is opened and shut off when the faucet is closed.

The material is rust and corrosion resistant.

Can be used in ponds or fish tanks to increase oxygen.

Safe IP54 rating if exposed to water splashes.

This pump is not used to draw water from the source, this pump is used to increase the water pressure.

Ideal for pushing water into or from a cistern into a faucet/shower

100W Booster Pump Specifications:

Propelling distance: 15 meters

Increase volume: 18 liters/minute

Power (Max): 100w

Flow rate: 0.8 cubic meters per hour

Voltage: 220V 50/60Hz

Speed: 2860rpm

Current: 0.47A

Insulation class: E

Capacity: 3.0uF

Protection class: IP20

Diameter: 15mm

Package Contents:

plunger pump

Connector

Automatic valve switch

rubber sealed loop

Tips: The correct way to use the booster pump is to drain the water first and then turn on the power. If there is no water, the pump motor is already working. At this time, the motor is easy to burn out, because the motor will affect the water pump when it runs at high speed.

The working principle of the booster pump: When the booster pump is full of liquid, turn on the booster pump, the liquid in the pump will rotate rapidly with the impeller, and under the action of centrifugal force, it will fly away from the impeller and be discharged to the outside. At this time, a low-pressure area is formed in the center of the impeller in the pump, and the water on the other side of the pump continues to be sucked, and continues to leave the impeller and enter the water.

💖[Products] All our products are 100% brand new and carefully tested before we ship to couriers

💖[Payment] We offer cash on delivery, but if cash on delivery is applicable, please check with your account using your address.